Vacuum coating equipment in the vacuum pump should be how to maintain?

     The vacuum pump for vacuum coating equipment, the equipment operation will generate heat, if increase in hot conditions, such as temperature increases, then the weight of equipment will increase. Under this situation, how to the maintenance?

      First: to prevent the vacuum pump or avoid the vacuum pump placed in the sun! Try to make the vacuum pump in a cool place, in the outdoor place to pay attention to the vacuum pump can not let the vacuum pump in the sun. Vacuum pump at work time temperature is high, if the heat is hard to send out, vacuum pump temperature will rise, once they reach zero temperature vacuum pump, there will be mechanical failure.

     Second: the vacuum pump must be in the ventilation position or the room is equipped with cooling device can also be! Willing to be the same, but in order to make the vacuum pump cooling performance is better, as far as possible to reduce the working temperature of the vacuum pump.

    Third: supplies in a timely manner to replace. The most important of which is: oil mist separator (exhaust filter) and oil! These two kinds of supplies must be promptly replaced. If the exhaust filter is to replace the first time if there is a scrap or other quality issues! Oil appeared color change, sediment, began to appear in the emulsion and other phenomena can not just stay in the maintenance, to replace all the vacuum pump oil.

    Fourth: in the hot weather before the vacuum pump for a comprehensive cleaning and maintenance.

Fifth: the rest of the matter is basically the same as the conventional maintenance of the same.